5.8 - Accelerated Licence Agreement (inc low risk Commercialisation)

A licence agreement for an IP owner to licence IP Rights (IPR) (including IPR developed as part of a project) on a non-exclusive basis to the other party, either for non-commercial use or for low-risk commercialisation.

On this page:

When should it be used?

  • To allow non-commercial use of the IP; or
  • For commercial transactions valued at less than $100,000 or agreed by the parties to be low risk; and
  • The parties are Australian entities

Whilst it will generally be the university licensing IPR to an industry partner, the agreement is structured so that either party could be the Licensor. The agreement is also suitable when a party is a Commonwealth Entity.

When should it not be used?

  • An Accelerated Licence Agreement (inc low risk Commercialisation) is only recommended when both parties decide that the Accelerated agreement is appropriate. If you cannot agree, and the licence is for commercialisation, use of the Licence Agreement (Non-exclusive Commercialisation) is recommended
  • For the grant of an exclusive commercial licence to IPR (the Licence Agreement (Exclusive Commercialisation) must be used)
  • As a licence arrangement for equipment (use the Equipment Licence Agreement)
  • When one party is not an Australian entity

Should I use the Accelerated or Standard Non-Exclusive Licence?

The university and the industry partner should consider the following factors to decide whether to use the Accelerated or Standard licence template for a non-exclusive licence. Independent advice or further information from the other party may be needed to make an informed judgement.

  • Will the licence be for uses that do not involve commercialisation? If the licence is for internal use only, then the Accelerated Licence Agreement (inc low risk Commercialisation) must be used. The Research Agreement templates already include a licence to the industry partner for internal use, which will normally be sufficient and in these cases there is no requirement to use this Agreement. If additional coverage is required by the industry partner, the parties should enter into a separate licence agreement using this template
  • Are indemnity or warranty provisions needed? If one or both parties require indemnity and/or warranty provisions, then it is recommended that a Standard Licence Agreement is used, as these include standard warranty and indemnity provisions that can be customised as required
  • Are the Fees payable expected to be less than $100,000? For many lower value agreements, the Accelerated Licence Agreement (inc low risk Commercialisation) will be appropriate, and will streamline the process of negotiating and finalising an agreement, which can otherwise be costly and time consuming for both parties. Each form of agreement allows for flexibility in how the parties set the Fees - including for royalty payments. However, if the risks in the agreement are high and/or specific risks are identified, the Standard Licence Agreement will be more suitable, for example if:
    • one party is a foreign entity
    • the licence structure or Fees are complex
    • the proposed intellectual property arrangements are complex (for example, multiple types of intellectual property being licensed with different licensing approaches)
    • there are existing arrangements in place between the parties
  • What has the internal risk assessment returned? Before starting a commercialisation project, each party should carry out their own risk assessment. Factors to consider include:
    • what is the potential legal exposure that the activity may create?
    • could this activity lead to a breach of intellectual property rights, including patent or copyrights?
    • will this activity involve significant physical or environmental risks?

If the internal assessment indicates a low risk, then the Accelerated Licence Agreement (inc low risk Commercialisation) would be appropriate

This risk assessment may also be used to determine an appropriate liability cap for the agreement. For the Accelerated Licence Agreement (inc low risk Commercialisation), the liability cap would generally not exceed $100,000. If the proposed liability cap is higher than $100,000, the Standard Licence Agreement may be more appropriate

  • Are additional arbitration or mediation systems needed: While the parties can always agree to refer their dispute to mediation, there is no mandated mediation or arbitration in the Accelerated Licence Agreement (inc low risk Commercialisation). If this is required, the Standard Licence Agreement should be considered
  • Will the licensee be paying a royalty? Either the Accelerated Licence Agreement (inc low risk Commercialisation) or the Standard Licence Agreement can be used with a royalty model. The method for calculating the royalty must be agreed by the parties. If the method is complex, the Standard Licence Agreement is preferred, as it provides more guidance on audit rights and a template that can be adapted for calculation of royalty amounts.  In each case parties should obtain independent financial and taxation advice
  • Is sublicensing allowed? In most commercialisation arrangements a licensee may wish to be permitted to sublicense the licensed IP rights to enable commercial exploitation. For example, the licensee may wish to outsource some aspects of manufacturing, service provision or sales.  While this is consistent with options in both the Accelerated Licence Agreement (inc low risk Commercialisation) and the Standard Licence Agreements, it indicates a higher level of complexity and risk. If sublicensing is allowed for these types of activities, then the Standard Licence Agreement is recommended, as this includes template provisions regulating sublicensing, such as provisions which must be included in the sublicence agreement, whether the sublicence must be approved, and management of the risks associated with sublicensing
  • Other factors to consider are: whether the agreement is required to address the ownership and/or licensing of any improvements back to the licensor, and whether there are any product safety requirements that need to be addressed.  In general, these factors increase risk and make the Standard Licence Agreement more appropriate

Key considerations when completing the template

The following table is provided as a guide to help the parties appreciate the key considerations that each party will have when negotiating an Accelerated Licence Agreement (inc low risk Commercialisation) using the template.

The template is provided in the Accelerated track and it is expected that it can be used with minimal negotiation between the parties. Nevertheless, discussing and understanding each party’s needs and concerns up front will help you reach an agreement more quickly. A licence agreement may take three to six months or more to negotiate and sign, often longer, depending on the complexity of the proposed licence. It is, therefore, important the parties start these discussions as early as possible.

For organisations, particularly SMEs, that have not previously been asked to enter this type of agreement, this table will help you understand what the key provisions of a licensing agreement are and what you need to discuss and agree in order to finalise the agreement from the template.

Additional plain English guidance on the meaning of key clauses is provided in a separate annotated version of the template.

This table sets out the key points each party needs to consider when licensing IP on a non-exclusive basis using the Accelerated Licence Agreement (inc low risk Commercialisation). Understanding your own key considerations, as well as those of the other party, will help you to negotiate a fair and reasonable agreement that works for both parties.

Key points Licence Provision University (Licensor) Industry partner (Licensee)
Term
  • The time period of the licence
  • Generally, this covers the life of any registered IPR or a defined number of years for copyright or software licences
  • Clarity over how long the licence will last and what happens when it expires
  • Ensure the industry partner has the rights it needs for long enough, and that this matches their business model and the level of investment needed to get to market
Licensed IPR & Technology
  • A clear definition of what IPR is being licensed and its technology field and intended applications
  • Details of any Materials being transferred as part of the licence and how they need to be treated
  • Where the Licensed IPR includes Confidential Information, the Licensee must not disclose it unless the parties have agreed otherwise
  • Be clear on exactly what is being licensed and what is not
  • Check that you have the right to grant the rights to the IPR
  • Be clear on exactly what is being licensed to ensure the industry partner has access to everything it needs to commercialise the IPR
  • Ensure you understand any restrictions in terms of Confidential Information that forms part of the Licensed IPR
Licence Scope
  • The scope of the licence and whether this is for internal use only or whether it also includes commercialisation rights
  • The granted rights should match the needs, capabilities and commitment from the industry partner
  • Ensure the industry partner has the rights it needs and that this matches your business model and the level of investment needed to get to market
Limitations on Use
  • A clear definition of the specific field of use or application that the licence is granted for
  • Ensure that the licence is to those fields of use where the industry partner has expertise
  • This is particularly important with IPR that can be applied in many different applications (so called platform technologies)
  • Ensure the industry partner has the rights it needs and that this matches your business model and the level of investment needed to get to market
Derivatives
  • Improvements (Derivatives) to the Licensed IPR made by the Licensee will be owned by them
  • If the Licensor also wants to use these improvements, this will need to be agreed and included in the agreement
  • Where the University is the Licensor, it may be appropriate to ask for a licence to Derivatives created by the company for research and teaching purposes. This will need to be agreed by the parties and set out in the agreement
  • Where the industry partner is the Licensor, it can be important to have access to Derivatives made by the Licensee to enable the industry partner to use these themselves. This will need to be agreed and set out in the agreement
Third Party IPR
  • Details of any IPR owned by third parties within the scope of the rights being licensed - for example third party software or hardware
  • If Third Party IPR is relevant, no rights are granted to the Licensee unless this is specifically inserted
  • Ensure that the Licensee is clear what other licences it may need to use Third Party IPR (if any)
  • For most licences this would not be expected to be relevant
  • Ensure the industry partner is aware of any Third Party IPR restrictions and any further licences it may need to obtain from others
Further assurances
  • If the licence includes commercialisation rights, details of any additional obligations the Licensee may have – for example to provide a Technology Roadmap or agree to development milestones
  • The template includes very limited assurances for the licensed IPR and no indemnities from either party. Whilst the template can be varied to include these, the Standard Licence templates may be more appropriate to use
  • Ensure that the impact of the licensed IPR is maximised and the industry partner does not take a licence and then does not develop the technology
  • This is less of a concern as this licence is non-exclusive. However, agreeing a development plan and milestones can still be important
  • If the company is seeking additional warranties relating to the licensed IPR, carefully consider if these are appropriate and that you can give them
  • If the licence includes commercialisation rights and an indemnity from the company for these activities is required, this will need to be added to the template or the parties should use the Standard Licence templates
  • Ensure the industry partner has the freedom to take commercial decisions and adopt development timelines that are realistic
  • Ensure any diligence requirements reflect technical and commercial realities and are achievable
  • Consider whether additional warranties and indemnities are required / being asked for and if so whether to include them in this template or use the Standard Licence templates
Fee
  • Details of any fees or if the licence is royalty-free
  • If a Fee is payable, details of whether this is paid upfront, or against milestones and/or a royalty on sales
  • Ensure a fair return for the IPR if a Fee is appropriate
  • The template does not include obligations for the reimbursement of patent or other IPR costs. If this is important, ensure this is taken into account in the fees being charged
  • Ensure the fair value being paid for the licence matches the value it gains from access to the IPR, and any additional risks it may be taking to get the technology to market
Confidential Information
  • Details of any confidential information exchanged under the licence should be recorded
  • A period agreed for how long this information needs to be kept confidential. Often this will be 5-7 years, although longer periods may be appropriate in some circumstances
  • A perpetual term is sometimes appropriate, subject to the receiving party being confident they can manage this long-term obligation
  • In most cases the term will be the same for both parties
  • Where the Licensed IPR includes Confidential Information, the Licensee must not disclose it unless the parties have agreed otherwise
  • Ensure a clear description of any confidential information relating to the Licensed IPR is recorded
  • Ensure you understand your obligations with respect to confidential information shared with you
  • If you are asked to accept a perpetual term, ensure you have the systems and processes to manage these obligations into the future
  • Ensure details of any confidential information arising from your use of Licensed IPR are recorded
  • For example, you would usually expect progress and payment reports that you share with the Licensor will be kept confidential
  • If you are asked to accept a perpetual term, ensure you have the systems and processes to manage these obligations into the future
Liability cap
  • The financial limit agreed for all liabilities under the licence except for those that are specifically uncapped or cannot be limited by law
  • Ensure the agreed liability cap is in line with the value being captured by the licence
  • Where a cap is agreed, this can be limited to the fees payable or a multiple of these fees
  • The liability cap would generally not exceed $100,000. If the proposed liability cap is higher than $100,000, the Standard Licence Agreement may be more appropriate
  • Ensure the agreed liability cap is in line with the value being captured by the licence and the risks the Licensee is taking to develop the licensed IPR